Skip to content

NitroTek

CONDOR NITRO RADIO CONTROLLED BUGGY

  • Width
    		• 267MM
  • Height
    		• 155MM
  • Track
    		• 240MM
  • Length
    		• 430MM
  • Wheelbase
    		• 280MM
  • Gear ratio
    		• 8.35
  • Engine
    		• Team Infinity .18
  • Wheel dia.
    		• 88*34MM(FRONT); 88*41MM(REAR)
  • Ground clearance
    		• 27MM

      ,
    , ,
      ,
    • 1/10 Scale nitro radio controlled car
      • ,
    • 4WD Shaft drive system
      • ,
    • Infinity powerful .18 pull start engine
      • ,
    • Oil-filled shocks
      • ,
    • Single speed gear box
      • ,
    • Front and rear bevel differentials
      • ,
    • 75CC Fuel tank
      • ,
    • Metal disc brake system
      • ,
    • Pre-painted and cut body shell
      • ,
    • Sealed box for protecting receiver system
      • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals
      • ,
    ,

    If you want to race off road and on road ...

    Read more

    NitroTek

    CONQUISTADOR NITRO RC MONSTER TRUCK

  • Width
    		• 330MM
  • Height
    		• 165MM
  • Track
    		• 267MM
  • Length
    		• 390MM
  • Wheel base
    		• 280MM
  • Gear ratio
    		• 10.44
  • Engine
    		• Team Infinity 18
  • Wheel dia.
    		• 108*56MM
  • Ground clearance (F/R)
    		• 38MM/46MM

      ,
    , ,
      ,
    • 1/10 Scale nitro powered car
      • ,
    • 4WD Shaft drive system
      • ,
    • Infinity 18 size pull start engine
      • ,
    • Oil-filled Alluminium shocks
      • ,
    • Single speed gear box
      • ,
    • Front and rear bevel differentials
      • ,
    • 75CC Fuel tank
      • ,
    • Metal disc brake system
      • ,
    • Pre-painted and cut body shell
      • ,
    • Sealed box for protecting receiver system
      • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
      • ,
    ,

    Unstoppable power allows this off road truck to go where ...

    Read more

    NitroTek

    CONDOR PRO NITRO RADIO CONTROL BUGGY

  • Width
    		• 267MM
  • Height
    		• 155MM
  • Track
    		• 240MM
  • Length
    		• 430MM
  • Wheelbase
    		• 280MM
  • Gear ratio
    		• 5.69
  • Engine
    		• Team Infinity 18
  • Wheel dia.
    		• 88*34MM(FRONT); 88*41MM(REAR)
  • Ground clearance
    		• 27MM

      ,
    , ,
      ,
    • 1/10 Scale nitro powered car
      • ,
    • 4WD Shaft drive system
      • ,
    • Fully ball raced system
      • ,
    • Infinity 18 size pull start engine
      • ,
    • Aluminium oil-filled shocks
      • ,
    • Two speed automatic gear box
      • ,
    • Front and rear bevel differentials
      • ,
    • 75CC Fuel tank
      • ,
    • Metal disc brake system
      • ,
    • Pre-painted and cut body shell
      • ,
    • Sealed box for protecting receiver system
      • ,
    • Anti-roll bars pre-fitted
      • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
      • ,
    ,

     

    ,

    If you want to race off road and on road ...

    Read more

    NitroTek

    CONQUISTADOR SPECIAL EDITION NITRO RC TRUCKS

    standard Conquistador and ..." />

  • Width
    		• 330MM
  • Height
    		• 165MM
  • Track
    		• 267MM
  • Length
    		• 390MM
  • Wheel base
    		• 280MM
  • Gear ratio
    		• 10.44
  • Engine
    		• Team Infinity 18
  • Wheel dia.
    		• 108*56MM
  • Ground clearance (F/R)
    		• 38MM/46MM

      ,
    , ,
      ,
    • Fully Upgraded Special Edition!
      • ,
    • 1/10 Scale nitro powered car
      • ,
    • 4WD Shaft drive system
      • ,
    • Infinity 18 size pull start engine
      • ,
    • Oil-filled Alluminium shocks
      • ,
    • Single speed gear box
      • ,
    • Front and rear bevel differentials
      • ,
    • 75CC Fuel tank
      • ,
    • Metal disc brake system
      • ,
    • Pre-painted and cut body shell
      • ,
    • Sealed box for protecting receiver system
      • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
      • ,
    ,

    We have taken a standard Conquistador and ...

    Read more

    NitroTek

    CONDOR PRO SPECIAL EDITION NITRO BUGGY

    standard Condor Pro ..." />

  • Width
    		• 267MM
  • Height
    		• 155MM
  • Track
    		• 240MM
  • Length
    		• 430MM
  • Wheelbase
    		• 280MM
  • Gear ratio
    		• 5.69
  • Engine
    		• Team Infinity 18
  • Wheel dia.
    		• 88*34MM(FRONT); 88*41MM(REAR)
  • Ground clearance
    		• 27MM

      ,
    , ,
      ,
    • Fully Upgraded Special Edition!
      • ,
    • 1/10 Scale nitro powered car
      • ,
    • 4WD Shaft drive system
      • ,
    • Fully ball raced system
      • ,
    • Infinity 18 size pull start engine
      • ,
    • Aluminium oil-filled shocks
      • ,
    • Two speed automatic gear box
      • ,
    • Front and rear bevel differentials
      • ,
    • 75CC Fuel tank
      • ,
    • Metal disc brake system
      • ,
    • Pre-painted and cut body shell
      • ,
    • Sealed box for protecting receiver system
      • ,
    • Anti-roll bars pre-fitted
      • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
      • ,
    ,

    We have taken a standard Condor Pro ...

    Read more

    NitroTek

    CYCLONE PRO NITRO RADIO CONTROL CARS

  • Width
    		• 199MM
  • Height
    		• 115MM
  • Track
    		• 185MM
  • Length
    		• 380MM
  • Wheelbase
    		• 259MM
  • Gear ratio
    		• 5.69
  • Engine
    		• New Team Infinity 18
  • Wheel dia.
    		• 64*26MM
  • Ground clearance
    		• 8.5MM

      ,
    , ,
      ,
    • 1/10 Scale nitro powered car
      • ,
    • 4WD Shaft drive system
      • ,
    • Fully ball raced system
      • ,
    • Infinity .18 pull start engine
      • ,
    • Aluminium adjustable oil-filled shocks
      • ,
    • Two speed automatic gear box
      • ,
    • Front and rear bevel differentials
      • ,
    • 75CC Fuel tank
      • ,
    • Metal disc brake system
      • ,
    • Pre-painted and cut body shell
      • ,
    • Sealed box for protecting receiver system
      • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
      • ,
    ,

    Our quickest model, the Cyclone PRO is for the serious ...

    Read more

    NitroTek

    CYCLONE NITRO REMOTE CONTROLLED CARS

  • Width
    		• 199MM
  • Height
    		• 115MM
  • Track
    		• 185MM
  • Length
    		• 380MM
  • Wheelbase
    		• 259MM
  • Gear ratio
    		• 8.35
  • Engine
    		• New Powerful Team Infinty 18
  • Wheel dia.
    		• 64*26MM
  • Ground clearance
    		• 8.5MM

      ,
    , ,
      ,
    • 1/10 Scale nitro powered car
      • ,
    • 4WD Shaft drive system
      • ,
    • Japanese high quality pull start engine
      • ,
    • Oil-filled shocks
      • ,
    • Single speed gear box
      • ,
    • Powerful .18 engine
      • ,
    • Front and rear bevel differentials
      • ,
    • 75CC Fuel tank
      • ,
    • Metal disc brake system
      • ,
    • Pre-painted and cut body shell
      • ,
    • Sealed box for protecting receiver system
      • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
      • ,
    ,

    For all the speed junkies! The Cyclone is our quickest ...

    Read more

    NitroTek

    BACKWASH NITRO RADIO CONTROLLED BUGGY

  • Length
    		• 400mm
  • Height
    		• 160mm
  • Width
    		• 250mm
  • Wheelbase
    		• 275mm
  • Gear Ratio 2 Speed
    		• 5.84
  • Ground Clearance
    		• 26mm
  • Front Tyres
    		• 32mm width 86mm diameter
  • Rear Tyres
    		• 40mm width 86mm diameter
  • Radio
    		• Wheel type 2.4G
  • Engine
    		• Infinity .18

      ,
    , ,
      ,
    • Pivot Ball suspension
      • ,
    • Assembled Oil-filled aluminium shocks
      • ,
    • 2.5mm thick anodised aluminium chassis
      • ,
    • Composite Tuned Pipe
      • ,
    • Pre-painted body with decals applied
      • ,
    • Super-efficient 4WD shaft-drive
      • ,
    • 75 cc fuel tank with splash guard
      • ,
    • 2 speed automatic gearbox
      • ,
    • Hollow light weight flywheel
      • ,
    • Slipper clutch system to protect spur gear
      • ,
    • High impact & high traction electroplated wheels
      • ,
    • Fiber disc brake for extra stopping power
      • ,
    • Front and rear hardened metal drive gears
      • ,
    • Sealed radio box protects the electronics
      • ,
    • Adjustable steel turnbuckles
      • ,
    • High performance Infinity 18 Engine
      • ,
    • Wheel controller
      • ,
    ,

    This is the great looking and performing nitro buggy. The ...

    Read more

    NitroTek

    BACKWASH PRO NITRO RADIO CONTROLLED BUGGY

  • Length
    		• 400mm
  • Height
    		• 160mm
  • Width
    		• 250mm
  • Wheelbase
    		• 275mm
  • Gear Ratio 2 Speed
    		• 5.84
  • Ground Clearance
    		• 26mm
  • Front Tyres
    		• 32mm width 86mm diameter
  • Rear Tyres
    		• 40mm width 86mm diameter
  • Radio
    		• Wheel type 2.4G
  • Engine
    		• Infinity .18

      ,
    , ,
    All the top features of the standard Backwash nitro radio controlled car as listed below, plus loads of hop ups pre-installed as listed above!
    ,
      ,
    • Pivot Ball suspension
      • ,
    • Assembled Oil-filled aluminium shocks
      • ,
    • 2.5mm thick anodised aluminium chassis
      • ,
    • Composite Tuned Pipe
      • ,
    • Pre-painted body with decals applied
      • ,
    • Super-efficient 4WD shaft-drive
      • ,
    • 75 cc fuel tank with splash guard
      • ,
    • 2 speed automatic gearbox
      • ,
    • Hollow light weight flywheel
      • ,
    • Slipper clutch system to protect spur gear
      • ,
    • High impact & high traction electroplated wheels
      • ,
    • Fiber disc brake for extra stopping power
      • ,
    • Front and rear hardened metal drive gears
      • ,
    • Sealed radio box protects the electronics
      • ,
    • Adjustable steel turnbuckles
      • ,
    • High performance Infinity 18 Engine
      • ,
    • Wheel controller
      • ,
    ,

     

    ,

    The Backwash Pro is the ultimate nitro rc car, if ...

    Read more

    NitroTek

    BUG CRUSHER NITRO REMOTE CONTROL MONSTER TRUCKS

  • Length
    		• 400mm
  • Height
    		• 185mm
  • Width
    		• 310mm
  • Wheelbase
    		• 275mm
  • Gear Ratio 1 Speed
    		• 13.34
  • Ground Clearance
    		• 30mm
  • Tyres
    		• 60mm width 120mm diameter
  • Radio
    		• Wheel type
  • Engine
    		• Infinity .18

      ,
    , ,
      ,
    • Pivot Ball suspension
      • ,
    • Innovative spring loaded bumper
      • ,
    • 8 Oil-filled aluminium shocks
      • ,
    • 2.5mm thick anodised aluminium chassis
      • ,
    • Composite Tuned Pipe
      • ,
    • Pre-painted body with decals applied
      • ,
    • Super-efficient 4WD shaft-drive
      • ,
    • 75cc fuel tank with splash guard
      • ,
    • Hollow light weight flywheel
      • ,
    • Slipper clutch system to protect spur gear
      • ,
    • High impact & high traction electroplated wheels
      • ,
    • Fiber disc brake for extra stopping power
      • ,
    • Front and rear hardened metal drive gears
      • ,
    • Sealed radio box protects the electronics
      • ,
    • Adjustable steel turnbuckles
      • ,
    • High performance Infinity 18 Engine
      • ,
    • Wheel controller
      • ,
    ,

    This HSP nitro monster truck has been finished with a ...

    Read more

    NitroTek

    BUG CRUSHER PRO NITRO REMOTE CONTROL TRUCK

  • Length
    		• 400mm
  • Height
    		• 185mm
  • Width
    		• 310mm
  • Wheelbase
    		• 275mm
  • Gear Ratio 1 Speed
    		• 13.34
  • Ground Clearance
    		• 30mm
  • Tyres
    		• 60mm width 120mm diameter
  • Radio
    		• Wheel type
  • Engine
    		• Infinity .18

      ,
    , ,

    All the top features of the standard Bug Crusher as listed below plus loads of hop ups pre-installed as listed above! 

    ,
      ,
    • Pivot Ball suspension
      • ,
    • Innovative spring loaded bumper
      • ,
    • 8 Oil-filled aluminium shocks
      • ,
    • 2.5mm thick anodised aluminium chassis
      • ,
    • Composite Tuned Pipe
      • ,
    • Pre-painted body with decals applied
      • ,
    • Super-efficient 4WD shaft-drive
      • ,
    • 75cc fuel tank with splash guard
      • ,
    • Hollow light weight flywheel
      • ,
    • Slipper clutch system to protect spur gear
      • ,
    • High impact & high traction electroplated wheels
      • ,
    • Fiber disc brake for extra stopping power
      • ,
    • Front and rear hardened metal drive gears
      • ,
    • Sealed radio box protects the electronics
      • ,
    • Adjustable steel turnbuckles
      • ,
    • High performance Infinity 18 Engine
      • ,
    • Wheel controller
      • ,
    ,

    This HSP nitro monster truck has been finished with a ...

    Read more

    NitroTek

    ATTACKER 1/8 SCALE NITRO RC BUGGY

  • Height
    		• 185mm
  • Length
    		• 505mm
  • Width
    		• 310mm
  • Wheel base
    		• 315~320mm
  • Track F/R
    		• 310mm
  • Ground clearance
    		• 30mm
  • Weight
    		• 3300g
  • Transmitter
    		• 2 channel

      ,
    , ,
      ,
    • 1/8 Scale Gas Powered Car
      • ,
    • Fully Assembled
      • ,
    • 4wd Shaft Drive System
      • ,
    • W/.18 Easy-To-Start Pull Start Powerful Engine
      • ,
    • Oil-Filled Aluminium Shocks
      • ,
    • Single Speed
      • ,
    • Front And Rear Bevel Differentials
      • ,
    • W/125cc Fuel Tank
      • ,
    • Quicker Steering And Fast Response
      • ,
    • Low Centre Of Gravity Design
      • ,
    ,

    The Attacker is our entry level to the world of ...

    Read more

    NitroTek

    CYCLONE SELF BUILD NITRO RC CAR KIT

  • Width
    		• 199MM
  • Height
    		• 115MM
  • Track
    		• 185MM
  • Length
    		• 380MM
  • Wheelbase
    		• 259MM
  • Gear ratio
    		• 8.35
  • Engine
    		• New Powerful Team Infinity 18
  • Wheel dia.
    		• 64*26MM
  • Ground clearance
    		• 8.5MM

      ,
    , ,
      ,
    • 1/10 Scale nitro powered car
      • ,
    • 4WD Shaft drive system
      • ,
    • Japanese high quality pull start engine
      • ,
    • Oil-filled shocks
      • ,
    • Powerful .18 engine
      • ,
    • Front and rear bevel differentials
      • ,
    • 75CC Fuel tank
      • ,
    • Metal disc brake system
      • ,
    • Pre-painted exclusive body shell
      • ,
    • Sealed box for protecting receiver system
      • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
      • ,
    ,

    By popular demand we are now stocking a range of ...

    Read more

    NitroTek

    CONDOR SELF BUILD NITRO RC BUGGY KIT

  • Width
    		• 267MM
  • Height
    		• 155MM
  • Track
    		• 240MM
  • Length
    		• 430MM
  • Wheelbase
    		• 280MM
  • Gear ratio
    		• 8.35
  • Engine
    		• Team Infinity .18
  • Wheel dia.
    		• 88*34MM(FRONT); 88*41MM(REAR)
  • Ground clearance
    		• 27MM

      ,
    , ,
      ,
    • 1/10 Scale nitro radio controlled buggy
      • ,
    • 4WD Shaft drive system
      • ,
    • Infinity powerful .18 pull start engine
      • ,
    • Oil-filled shocks
      • ,
    • Front and rear bevel differentials
      • ,
    • 75CC Fuel tank
      • ,
    • Metal disc brake system
      • ,
    • Pre-painted body shell
      • ,
    • Sealed box for protecting receiver system
      • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
      • ,
    ,

    By popular demand we are now stocking a range of ...

    Read more

    NitroTek

    SHENGQI 1/5TH SCALE PETROL RADIO CONTROL BAJA BUGGY 2.4GHZ

  • Scale
    		• 1/5
  • D/W
    		• Rear 2WD system, differential with built-in gears
  • Brakes
    		• Rear Disc
  • Speed
    		• 80km/h
  • Engine
    		• Single cylinder, two stroke, air-cooled, 23cc
  • Torque
    		• 1.8N.m
  • Power
    		• 1.58kw / 2.15 bhp
  • Fuel
    		• Petrol / engine oil (25
  • Fuel tank capacity
    		• 40 minutes
  • Start method
    		• pull start
  • LxWxH
    		• 817x480x280mm 
  • Tyres
    		• 170mm x 60mm
  • Wheelbase (F/R)
    		• 570mm

      ,
    • 2.4GHz LCD transmitter
      • ,
    , ,
      ,
    • Fully assembled Baja Buggy
      • ,
    • Powerful pull start 23cc engine 
      • ,
    • Heavy duty parts (many metal)
      • ,
    • Differential with built-in gear
      • ,
    • Fully adjustable oil-filled shocks
      • ,
    • Disc brake system
      • ,
    • CE/ROHS approved controller
      • ,
    • Strong 15kg/cm OEM Futaba servo
      • ,
    • Sealed electronics box for use on wet days
      • ,
    • Aluminium chassis
      • ,
    • Waibro Carburetor
      • ,
    • NGK spark plug
      • ,
    • 80 km/h top speed
      • ,
    • 2.4GHz radio equipment
      • ,
    • Beautiful carbon style shell
      • ,
    ,

    This ShengQi Buggy is a beast with a massive feature ...

    Read more

    Follow us on

    Twitter Facebook f Linkedin in Google plus g
    BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby